 |
NEOTAK Very quick setting cyanoacrylate adhesive  |
|
  [back]
|
It is a
single-component cyanoacrylic adhesive, not containing solvents, with a very
quick setting and cold hardening. It polymerizes immediately and in most cases, the little
humidity present on the part to be glued is enough to start the gluing process. The rapid
polymerization, together with an excellent adherence of the glue on different parts, make
the NEOTAK glue an irreplaceable product for the gluing of almost any material.
INSTRUCTIONS FOR USE:
1) surfaces must be clean and degreased
2) the two parts must perfectly match
3) lay off a thin film of product on one of the two parts and assembly them immediately
exerting a light pressure for a few minutes
4) polymerization takes place thanks to humidity present on the two parts
5) for the seizure of large surfaces, apply equidistant drops of product on the surface
rather than a film.
TECHNICAL DATA: Tolerance: 0.15 mm - Mean fixing time: 15 sec. -
Viscosity: 100 cPs
Break resistance: 21N/mm2 - Working temperature: - 54 + 82 °C (life : from 6 months to 1
year according to the ambient temperature) |
|
|